[. . . ] If such interference occurs, please increase separation between this unit and the mobile telephone. To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration. [. . . ] Do not place them near a television, personal computer or other devices easily influenced by magnetism. When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth® device (“PAIRING”) is displayed. (l 6)
Additional Connection
Connect an external music device (for AUX mode). Audio cable (not supplied)
∫ To select the sound input level of the external device
1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK]. Switch the equalizer off or turn the volume of the external device down to reduce the input signal. For details, refer to the instruction manual of the other equipment. Book
6 ページ
２０１３年１月１５日 火曜日 午後１時４分
Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this unit wirelessly. Refer to the operating instructions of the Bluetooth® device for details. Pairing Bluetooth® devices
Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near this unit. If this unit is already connected to a Bluetooth® device, disconnect it. Bluetooth® transmission mode
You can change the transmission speed to prioritize transmission quality or sound quality. To return all settings to the factory preset When the following situations occur, reset the memory:
≥ There is no response when buttons are pressed. (l below, “REMOTE ”) ≥ Is the battery depleted or is the battery inserted incorrectly?(l 4)
Messages ENGLISH
The following messages or service numbers may appear on the unit’s display. AUTO OFF”
≥ The unit has been left unused for about 30 minutes and will shut down within a minute. ) 2 While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead. Keep holding down [Í/I] until “--------” appears on the display. Note down the displayed number, disconnect the AC mains lead and consult your dealer. When “REMOTE 1” is displayed, press and hold [OK] and [ , AUX] for more than 4 seconds. When “REMOTE 2” is displayed, press and hold [OK] and [SOUND] for more than 4 seconds. The pairing of the device was unsuccessful or the registration has been replaced. For some built-in Bluetooth® devices, you have to set the audio output to “SC-NE1” manually. [. . . ] Be sure to install this unit as indicated within these operating instructions. 300 mm
67 mm 83 mm
122 mm 252 mm 169 mm 319 mm 570 mm 770 mm
12
VQT4U48
SC-NE1_EG~VQT4U48. Book
13 ページ
２０１３年１月１５日 火曜日 午後１時４分
2
Attach the wall mount bracket to the wall with 2 screws (not supplied). (Both sides)
≥ Use a level to ensure both wall mount brackets are level. [. . . ]